Home :: Lenovo Power Supply :: Lenovo PC7001 Power Supply

Brand new Lenovo PC7001 240W Power Supply

PC7001 - HuntKey 240-Watts PFC Power Supply for Lenovo M57 M58 M90, enjoys 3 Months Warranty,30-Day Money Back!

Lenovo PC7001 Power Supply

Brand new 45J9442 45J9441 240W For Lenovo Power supply PC9023 36-001729 36-001732 HK340-85FP.All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • PART NUMBER : 45J9442,45J9441
  • MODEL NO.: PC9023,36-001729,36-001732,HK340-85FP
  • Wattage: 240 WATT
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 3 Months Warranty | 30-Day Money Back
  • Compatible Brand:For Lenovo
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
PC7001 240w Huntkey 45J9444 45J9441 Lenovo M57 M58 M90

AC Input :
100-127v 6a 50/60hz
200-240v 3a 50/60hz
DC Output :
+5.08v 14a
+12v 17a
+3.3v 8a
-12v 0.5a
+5.08vsb 2.5a


Part No.
HK340-85FP, PC9023, PC7071, PC7001, PC7032,45J9442,45J9441

Compatible For lENOVO
For Lenovo thinkcentre m90



HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new LENOVO PC7001 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.