Home :: Lenovo Power Supply :: Lenovo HK280-23PP Power Supply

Brand new Lenovo HK280-23PP 180w Power Supply

180W PC Power Supply PA-2181-1 PCE028 HK280-21/23PP H/Q170 Q110 H110 PCE027 HK280-23PP HK280-21PP 10pin 4pin Server PSU, enjoys 3 Months Warranty,30-Day Money Back!

Lenovo HK280-23PP Power Supply

Brand new HK280-23PP Power Supply for lenovo.All power supplies are tested by our in house technicians and they are guaranteed to function properly.


  • Part Number: HK280-23PP
  • CPU Power Connector:4 pin
    Interface Type:20 + 4Pin
    Application:Server
  • Wattage: 180 WATT
  • Condition:
    Brand new, Tested, Working Good

Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+

  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 3 Months Warranty | 30-Day Money Back
  • Compatible Brand:For Lenovo
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
Power supply model: PA-2181-1
Voltage: 180w
Power supply size: 15 × 8.5 × 10cm
Power interface: motherboard 10PIN power supply (30cm) CPU 4PIN power supply (60cm)

Part No. HK280-23PP HK280-21PP PA-2181-1 PCE027 PCE028

Compatible For lENOVO Desktop:
Lenovo M4600 M4650 M4900c-00 m4200f-00 T4900d T6900c, ThinkCentre E74 M710T M8600.



HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new LENOVO HK280-23PP Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.