FSP Group Inc FSP450-50ETN Server - Power Supply 450W, FSP450-50ETN, 36200207, 0B56079, 54Y8860 .All power supplies are tested by our in house technicians and they are guaranteed to function properly.
Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
Compatible Power Supply 450W FSP450-50ETN, DPS-450DP, HK380-16FP PCB037 PCB038 for Lenovo M8400T M8500T Q77 B75 H81 14-pin Desktop Computer Power
This is a compatible universal power supply, quality guaranteed and stable performance, please rest assured to buy.
Part Number:54Y8899,FSP450-50ETN
Max Output power:450W
Brand:Lenovo
Compatible Model: HK380-16FP,FSP280-40PA
Power: 450W, 110-220v, weight: 0.8 kg,Size: 15*14*8.5cm
Output interface: motherboard 14-pin*1, CPU 4-pin*1, graphics card 6-pin*1
Compatible models: FSP450-50ETN, DPS-450DP, HK380-16FP FSP280-40PA PCB033 PCC001 FSP280-40EPA PCB037 PCB038 HK280-23FP HK280-22PP HK280-25FP
Spare part number: 54Y8899
Suitable for: Lenovo M8400T M8500T Q77 B75 H81 power supply, suitable for most 14-pin motherboard computers
1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.
2. Install the new LENOVO FSP450-50ETN Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)
3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.