Brand new Lenovo P300 P310 P320 P410 10-pin Power Supply 400W FSP400-40AGPAA 00PC738 .All power supplies are tested by our in house technicians and they are guaranteed to function properly.
Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
Type:Power Supply
Max Output Power: 400W.
AC Input(50-60Hz): 100-240V~6.0A.
Manufacturer Warranty:3 months
Compatible Model:For Lenovo P300 P310 P320 P410
Compatible Lenovo Model: P300 P310 P320 P410 W4092c W4095c M4200f-00
M4601c M4900c-00 T4900d T6900c M4600 M4650 ThinkCentre E74 M710T
M8600.
Compatible Model Number:FSP400-40AGPAA FSP250-30AGBAA PCE026
HK350-12PP HK280-21PP HK280-23PP PCE027 PCE028 PA-2181-1.
Compatible Part Number: SP50H29513 00PC738 m920T m720T A8800T A7000T
A6860T T4900D.
1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.
2. Install the new LENOVO FSP400-40AGPAA Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)
3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.