Brand new Lenovo H310 H315 H320 H330 i2650 i2676 i3550 Desktop Power Supply PSU 180W FSP180-50PLV HK280-86FP PC9029.All power supplies are tested by our in house technicians and they are guaranteed to function properly.
Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
Model : FSP180-50PLV
P/N : FSP180-50PLV, 9PA1804200, 36-001754
Type : GSBAGB
Dimension (L x Wx H) : 32.50 x 9.30 X 7.00
AC Input :AC 200 ~ 240V 50/60HZ
DC Output : 180W
Input Frequency Range : 50-60Hz
Max Output Power : 180W
Connector : 1x 20PIN
1x SATA
1x SATA
Compatible Lenovo Model:H305
H310
H315
H320
H330
Compatible Huntkey Model:
Huntkey
ih55
ir358
ir608
i1345
i1355
i3550
i4660
i2650
i2676
Compatible Part No:
9PA1804200
36-001754
PC9029
Compatible Model No:
FSP180-50PLV
HK280-86FP
FSP180-50NPL
1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.
2. Install the new LENOVO FSP180-50PLV Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)
3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.