Brand new 5P50V03181 HK600-11PP PCK010 500W Power Supply For Lenovo P340 P330 P328 P310 K M930T T4900K 10Pin.All power supplies are tested by our in house technicians and they are guaranteed to function properly.
Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
【Compatibility】 HK600-11PP PSU 500W Power Supply Compatible with Lenovo P340 P330 P328 P310 K M930T T4900K ,Compatible with Thinkcentre Workstation M90T 11CY 11D0 11D4 11D5 P340 30DH 30DJ 30DM 30E3 30E4 Power Supply.
【Model Number】 HK600-11PP, HK60011PP 500W power supply replacement
【Part Number】 PCK010 FSK010 5P50V03181 5P50V03218 SP50H29598 FSP600-60AGPAA Switching power supply
AC Input:
100-240V~ 50/60Hz, 7a
DC Output:
+12V1---35a
+12V2---30a
+12V3---30a
+12V4---30a
500w
Connector: 10Pin+8Pin+8Pin+8Pin
1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.
2. Install the new LENOVO 5P50V03181 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)
3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.