Home :: Lenovo Power Supply :: Lenovo 49P2150 Power Supply

Brand new Lenovo 49P2150 200w Power Supply

49P2150 - AcBel 200-Watts 200-240V AC 2.5A 50-60Hz Power Supply for Lenovo ThinkCentre Type 8320 , enjoys 3 Months Warranty,30-Day Money Back!

Lenovo 49P2150 Power Supply

Brand new Lenovo Api2Pc23 Lenovo 200 Watt Atx Power Supply For Thinkcentre A50 S50.All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • Part Number : Api2Pc23
  • Type : Atx
  • Compatibility: For Thinkcentre A50 S50
  • Wattage: 200 WATT
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 3 Months Warranty | 30-Day Money Back
  • Compatible Brand:For Lenovo
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
Acbel Model No: API2PC23 49P2149 200W 49P2149 49P2150 H22799R
Ibm lenovo ThinkCentre a50 s50

Ac Input
100-127V 5A
200-240V 2.5A 50/60Hz

Dc output
+5V 11.0A
+3.3V 4.0A
+12V 10.0A
-12V 0.2A
+5Vsb 2.0A
Connector:
1x 20-Pin Mini ATX System Board
1x Serial ATA (SATA)
2x Power (IDE) (Molex)
1x 4 Pin ATX +12V Power

Model : Thinkcentre S50 S51 Acbel
Mpn : API2PC23 49P2150 49P2149


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new LENOVO 49P2150 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.