Brand new Huntkey HK250-93FP 220W Power Supply

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
The HuntKey HK250-93FP 220W Full Voltage Firewall IPC Dedicated Small 1U Power Supply is a dependable and green answer for powering small 1U servers. With a focal point on overall performance and balance this strength deliver is engineered to supply steady strength output even as shielding your server additives from voltage fluctuations. Its compact layout makes it best for firewall IPC programs in which area is restrained however strength performance is crucial.

Model: HK205-93FP/ HK250-93FP / HK320-93FP
Rated power: 105W/150W/220W
Dimension: W82*H40*L150mm
Fan: 40mm dual ball bearing

Features:
Complies with Intel Flex ATX12V specification
Full range input 90~264V AC, active PFC design
40mm dual ball bearing fan with smart control circuit
Multiple protection: OVP, OCP, OTP, UVP, OPP & SCP
High efficiency, high reliability, low ripple and low noise
Multiple safety certification: CCC, CE & CB
Widely used in set-top boxes, firewalls, routers, NAS, media player, POS, advertising player, conferencing systems and other industrial applications

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new Huntkey HK250-93FP Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.