Home :: HP Power Supply :: HP S14-300P1A Power Supply

Brand new HP S14-300P1A - 290W Power Supply for Proliant Dl20 G9

Power Supply PSU PC For HP DL20 G9 S14-300P1A 823805-001 818046-501 290W, enjoys 6 Months Warranty,30-Day Money Back!

HP S14-300P1A Power Supply

Brand new S14-300P1A-HP 290-Watts Power Supply Non Hot-Pluggable for ProLiant DL20 G9 Server.

  • Part Number : S14-300P1A
  • Main Connector: 14-Pin
  • Wattage: 290W
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
290W S14-300P1A Power Supply for Proliant DL20 G9
MAX. OUTPUT POWER: 290W

AC INPUT
100-240V~ /5.5A (50-60Hz)

DC OUTPUT
+12V = 21.17A
+12Vsb = 3A

Dimensions
107mm x 40mm x 158mm

Connectors
(1) 14-Pin ATX Connector (14")
(1) 16-Pin Micro Connector (P2) (8.5")

Compatible with (not limited to) HPE ProLiant DL20 Gen9 Server

HP Spare PN: 823805-001
HP PN: 818046-501, P07982-501 P07898-001
Chicony Model: S14-300P1A


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp S14-300P1A Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.