Brand new Hp PCK018 D19-260P1A 260w 4-PIN 260w hp prodesk 400 G7

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
100% Tested and High Quality: This product is backed by our strict testing standards, ensuring that each unit is thoroughly checked for quality and performance. With a rating power of 251w - 300w and a max power of 300w, it is designed to meet the power needs of various applications, including server systems.
PCK018 260W EPA92 ENT20 Power Supply For HP 800 G6 G8 G9 PA-2251-5HK-HPF

Part Number: PA-2251-5
MPN pck018,D19-260P1A
Model PA-2251-5HK-HPF
Power 260W
Compatible for HP 800 G6 G8 G9
Condition:Good,Tested,Working
HP L70041-002 260W 4-PIN 260W PCK018 L70041-001

AC Input :
100-240V 3.1A 50-60HZ


DC Output :
12.1 vmain 18A
+12.1 vcpu 18A


Model:D19-260P1A
Compatible Models: PCH022, PA-2251-5, PCK018, D16-250P1A, D16-250P2A, L70041-002 , L70041-001

Compatible Models:
HP prodesk 400 G7
HP prodesk 480 G7 / 600 G6

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp PA-2251-5 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.