Brand new HP PCA227 220W Power Supply For HP Pavilion Slimline 400 PC 633196-002 D10-220P1A

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
MAX. OUTPUT POWER: 220W
Part Number : PS-6221-9
Max Output power:220W
Brand:For HP
Compatible Model: PCA222,D10-220P1A,FH-ZD271MGR
Package : 1 X Power Supply
Connector:

P1:24-Pin ATX Power ;
P2:4-Pin ATX Power;
P3: SATA Power
P4: SATA Power

Part number: PCA222,PCA227 ,FH-ZD221MGR ,PS-6221-9 ,PS-6221-7,PCA227,FH-ZD271MGR,DPS-220AB-6A,D10-220P1A,633193－001,633195-001, 633196-001

Compatible Models:
For HP s5-1333cn s5-1520cn s5-1523cn s5-1526cn s5-1537cn s5-1010cx s5-1011cx s5-1013cx s5-1017cn s5-1020cn s5-1021cn s5-1026cn s5-1110cx s5-1113cx s5-1116cn s5-1120cn s5-1205cx s5-1206cn s5-1207cn s5-1210cx s5-1213cx s5-1220cn s5-1233cn s5-1310cx s5-1311cx s5-1313cn s5-1314cx s5-1320cx s5-1321cx s5-1326cn s5-1337cn s5-1400cx s5-1403cx s5-1406cn s5-1500cx s5-1510cn s5-1517cx

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp PCA227 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.