Home :: HP Power Supply :: HP PA-1181-8 Power Supply

Brand new HP PA-1181-8 180W Power Supply For HP 4300 6300 AIO PSU DPS-180AB-8A 658262-001

PA-1181-8 - MAX180W PSU DPS-180AB-8A 658262-001 656931-001 D11-180P1A PA-1181-8 For HP 4300 6300 AIO, enjoys 3 Months Warranty,30-Day Money Back!

HP PA-1181-8 Power Supply

Brand new HP Pro 6300 All-in-One AIO 180W 6-Pin PSU Power Supply 656931-001 658262-001 PA-1181-8.

  • SPS: 658262-001
  • Lite-On Model: PA-1181-8
  • Max Output: 180W
  • Wattage: 180W
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 3 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
MAX. OUTPUT POWER: 180W
For HP Compaq Pro Elite 4300 6300 AIO Switching Power Supply
SPS: 658262-001
Lite-On Model: PA-1181-8
Max Output: 180W
HP P/N: 656931-001
Output voltage : 19.5V 9.25A 180W

Replaceability with the following models:
PA-1181-8 658262-001 656931-001



HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp PA-1181-8 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.