Home :: HP Power Supply :: HP M76034-002 Power Supply

Brand new 260W M76034-002 Power Supply For 480 G9 MT 600 800 G8 MT

For HP ProDesk 600G8 480G9 MT Power Supply D19-260P1B 260W M76034-002, enjoys 6 Months Warranty,30-Day Money Back!

HP M76034-002 Power Supply

The HP ProDesk 600 G8, 480 G9 MT Power Supply M76034-002 260W is a reliable and power supply unit designed for HP ProDesk models 600 G8 and 480 G9 MT.

  • Part Number: M76034-002
  • Model:PA-2261-5 HK,D19-260P1B
  • Port: 4+ 4+ 7 Pins
  • Wattage: 260W
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
The HP ProDesk 600G8, 480G9 MT Power Supply D19-260P1B 260W M76034-002 is a reliable and power supply unit designed for HP ProDesk models 600G8 and 480G9 MT. This 260W power supply ensures consistent power delivery to your system, supporting optimal performance and system stability.

Part Number: M76034-001,M76034-002
Model: PA-2261-5 HK,D19-260P1B
Size: 16.5*9.5*7.3 cm,
Port: 4+ 4+ 7 Pins,
AC Input : 100-240 V
Output : 260 Watts

Compatibility: HP ProDesk 600 G8, 480 G9 MT


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp M76034-002 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.