Home :: HP Power Supply :: HP D16-250P2A Power Supply

Brand new HP D16-250P2A 250W Power Supply For HP 400 600G4 800G3 D16-250P2A 901760-001

D16-250P2A - HP 250-Watts 901760-001 901761-002 250W Power Supply For HP 600 G3, enjoys 3 Months Warranty,30-Day Money Back!

HP D16-250P2A Power Supply

Brand new HP 480 400 G4 280 282 600 800G3 MT 250W PCH022 PCG002 D16-250P1A D16-250P2A 901760-004 901761-001.

  • Part Number: D16-250P2A
  • AC INPUT : 100-240V~/3.5 A,50-60 Hz
  • DC OUTPUT : +12.1V==/16A
  • Wattage: 250W
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 3 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
MAX. OUTPUT POWER: 250W
MODEL : D16-250P2A
PART NUMBER : 901761-002
AC INPUT : 100-240V~/3.5 A,50-60 Hz
DC OUTPUT : +12.1V==/16A
MAXIMUM POWER SHALL NOT EXCEED 250W
Output interface:

1X motherboard power supply 4PIN;
1X CPU power supply 4PIN;
1X 7Pin mini P2 small interface

Model: D16-250P2A PCH022 L08417-004 L08417-002
Part number: 901761-002 901760-001 901760-001 002 901760-004

Compatible Models:
For HP 400 600G4 800G3



HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp D16-250P2A Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.