Home :: HP Power Supply :: HP D16-180P3A Power Supply

Brand new HP D16-180P3A 180W Power Supply For HP Envy Pavilion 590/595

L08261-002 HP Envy Pavilion 590/595 Desktop 180W Power Supply D16-180P3A, enjoys 6 Months Warranty,30-Day Money Back!

HP D16-180P3A Power Supply

Brand new D16-180P3A 180W Power Supply For HP Pavillion 590,HP 280 PRO G3.


  • Part Number L08261-002
  • Model Number D16-180P1B
  • Input 100-240V~2.3A;50-60Hz
  • Wattage: 180W
  • Condition:
    Brand new, Tested, Working Good

Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+

  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
L08261-002 180W Power Supply D16-180P3A For HP Pavillion 590
Part Number L08261-002
Model Number D16-180P1B
Max Power 180W
Input 100-240V~2.3A;50-60Hz

Replaceability with the following models:
D16-180P1B, L08261-002, PCH023, D16-180P3A, PA-1181-6HY

Compatible Models:
HP Pavillion 590,
HP 280 PRO G3,
HP 280 PRO G4 MT

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp D16-180P3A Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.