Home :: HP Power Supply :: HP D11-230P1A Power Supply

Brand new HP D11-230P1A 230W Power Supply For HP 8300e AIO 4300 6300 600G1

D11-230P1A - D11-230P1A HP 230-Watts 80 Plus Gold Power Supply for Elite 8300 AIO, enjoys 3 Months Warranty,30-Day Money Back!

HP D11-230P1A Power Supply

Brand new HP 658263-001 8300E 230W Power Supply D11-230P1A 656932-001.

  • Model: D11-230P1A PA-2231-9 698621-001
  • Applicable machine: For HP 8300E
  • Max Output: 230W
  • Wattage: 230W
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 3 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
MAX. OUTPUT POWER: 230W
* Model: D11-230P1A PA-2231-9 698621-001
* Applicable machine: For HP 8300E
* Power: 230W

Replaceability with the following models:
PA-2231-8 656932-001 658263-001 D11-180P1B 699890-001 D11-230P1A
Fits the Following Models:
HP 8300e AIO



HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp D11-230P1A Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.