New HP D10-320P2A 320W Power Supply For HP Pro 6000 6200 6300 Elite 8000 8100 8200 8300

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
Part Number : PC8022
Max Output power:320W
Brand:Lenovo
Compatible Model: PS-4321-9HA,HP-D3201EO,D10-320P2A
Package : 1 X Power Supply

Brand new original HP desktop and workstation power supplies:
DPS-320NB A HP-D3201EO HP-3201AO D10-320P2A D12-320P1B CFH0320AWWA PS-4321-9HA DPS-320MB A PS-4321-9HP and other models

Applicable models: HP MT series (6000 6005 6200 6060 6080 6280 6300 6380 8000 8080 8100 8180 8200 8280 8300 8380) and other models and Z200, Z210 workstation
HP EliteDesk 800 G1 600G1 Tower PC Large Chassis Power Supply

Part No.: 503377-001/508153-001, 503378-001/508154-001, 611483-001/613764-001, 611484-001 613765-001, 707818-002/707906-001, etc.

Power strip interface: 4P*1, 6P*1, P2*1

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp D10-320P2A Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.