Home :: HP Power Supply :: HP 702453-001 Power Supply

Brand new 702453-001 320W Power Supply For HP EliteDesk 800 G1 Tower

HP Prodesk 800 G1 Tower 320W Power Supply 702305-002 702453-001 DPS-320RB A , enjoys 6 Months Warranty,30-Day Money Back!

HP 702453-001 Power Supply

702453-001 - HP 320-Watts 100-240V Power Supply for EliteDesk 800 G1 Tower.

  • Part Number: 702453-001
  • Connectors:6Pin, 4Pin, SATA
  • Wattage: 320W
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
Application:Desktop
Rating Power: 301W - 400W
Interface Type: 6Pin
Model No: DPS-320RB A
Part Number: 702305-001,702453-001, HP-D3201EO,D10-320P2A,DPS-320NB A,PCC006
Output power:320W
Input:100-240V~/5.5A
Input Frequency:50/60Hz
Connectors:6Pin, 4Pin, SATA
Applicable models
HP MT series (4000 4300 6000 6005 6080 6200 6280 6300 6380 8000 8080 8100 8180 8200 8280 8300)
HP Workstation (Z200 Z210 Z220)
HP prodesk 600 800 G1



HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp 702453-001 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.