Home :: HP Power Supply :: HP 578189-001 Power Supply

New HP 578189-001 240W Power Supply For HP RP5000 RP5700

240W HP 578189-001 RP5700 240W Power Supply 445771-002, 445102-001, enjoys 6 Months Warranty,30-Day Money Back!

HP 578189-001 Power Supply

Brand new PSU For HP RP5700 240W Power Supply PS-6241-02HD 445102-002 578189-001 445102-001 445771-001 PS-6241-02HC

  • PART NUMBER : 578189-001
  • Model: PS-6241-02HC
  • Wattage: 240W
  • Condition:
    New, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For HP
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
HP 445102-001 445771-001 578189-001 PS-6241-02HC 240W
Input :
100V-240V 50-60HZ 3.5A

Output :
240W
+5.08V 17A
+3.33V 15A
+12V 7.5A
+12VPCU 11.5A
-12V 0.15A
+5.08VAUX 3A

PART NUMBER : PS-6241-02HD 445102-002 578189-001 445102-001 445771-001 PS-6241-02HC
WATTAGE : 240 WATT
COMPATIBILITY : FOR RP5700S



HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new hp 578189-001 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.