Home :: Delta Power Supply :: Dell DPS-250AB-101B Power Supply

Brand new DPS-250AB-101B Delta 250 Watts Power Supply

New 16 disc Haikang video recorder 8632N 8664N 8616N-I16 Power Supply DPS-250AB-101B , enjoys 6 Months Warranty,30-Day Money Back!

Delta DPS-250AB-101B Power Supply

Brand new Delta DPS-250AB-101B 20-pin 4 IDE Hard Disk Interface Small Power Supply.All power supplies are tested by our in house technicians and they are guaranteed to function properly.

  • Part Number: DPS-250AB-101B
  • mpn: fsp250-60gnv
  • Wattage: 250 WATT
  • Condition:
    Brand new, Tested, Working Good
Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+
  • Availability: In stock
  • Condition: Brand new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For Delta
  • Certification:CE FCC ROHS

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
Haikang video recorder 8632N 8664N 8616N-I16 power supply DPS-250AB-101B For 16 disc

Part Number: DPS-250AB-101B
MPN: FSP250-60GNV
Voltage 100V-240V
Output: 12V 5V 3.3V
Size: 12.5*6.4 *11 cm
Condition: new
AC Input :
100V-240V 47-63HZ 6A

DC Output :
+3.3V 10A
+5V 15A
+12V 15A
+5VSB 2.0A
250W


HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new dell DPS-250AB-101B Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.