Brand new L280E-01 Power Supply for Dell Optiplex XE SFF D499R 0D499R CN-0D499R.All power supplies are tested by our in house technicians and they are guaranteed to function properly.
Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
D499R 0D499R CN-0D499R 280W Dell Optiplex XE SFF Power Supply L280E-01
Part Number : D499R,0D499R,CN-0D499R
Model Number: L280E-01
Max Power : 280W
Input : 100-240V / 5A / 50-60Hz
Application : Dell Optiplex XE SFF
Connectors
(1) 24-Pin Mini ATX Connector
(1) 4 Pin +12V ATX Connector
(1) Floppy Disk Drive (FDD) Connector
(1) 6-Pin Inline Connector
(1) SATA Connector
(1) mini-SATA Connector
Part Number:
Y738P,
L280E-01,
D499R,
PS-6281-9DA-RoHS,
D280ES-00,
D499R,
KD98N,
N949F,
DPS-280MB A
Compatible Models
Dell Optiplex XE SFF
1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.
2. Install the new dell D180EBS-00 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)
3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.