Brand new Dell H350PD-00 350W Power Supply for Dell Inspiron 530 Vostro 460 MT

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
MAX. OUTPUT POWER: 350W
AC INPUT
100-127V ~ /10A
200-240V ~ /5A
50-60Hz
DC OUTPUT
+5V = /18A
+5Vaux = /2A
+12VA = /12A
+12VB = /18A
-12V = /0.8A
+3.3V = /17A
Dimensions 150mm x 86mm x 140mm
Connectors
(1) 24-Pin ATX Connector (P1 10.5")
(1) 4-Pin 12V Connector (P2 9")
(1) 6-Pin PCI-E Connector (P7 16")
(4) SATA Connectors (P3 6" & P4 9" On the Same Cable) ( P5 9.5" & P6 15.5" On The Same Cable)

Compatible Part Numbers: YK6KW, VK6V1, 9J0VD

Compatible Model Number: D350PD-00, H350PD-00, L350PD-00,D350P003L,D350PM-01,AC350AM-00

Compatible Models
Dell Inspiron 530,Dell Inspiron 531
Dell Inspiron 535,Dell Inspiron 537
Dell Inspiron 545,Dell Inspiron 546
Dell Vostro 200,Dell Vostro 220
Dell Vostro 230,Dell Vostro 260
Dell Vostro 400,Dell Vostro 410
Dell Vostro 420,Dell Vostro 430
Dell Vostro 460,Dell Optiplex 390
Dell Optiplex 790,Dell Optiplex 990
Dell Optiplex 3010,Dell Optiplex 7010
Dell Optiplex 9010 Mini Tower (MT)
Dell Precision T1500,Dell Precision T1600
Dell Precision T1650,Dell XPS 8000
Dell XPS 8100,Dell XPS 8500
Dell Studio 540 MT,Dell Studio 540s MT
and many more Dell Towers

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new dell H350PD-00 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.