Brand new Dell F235E-00 235W Power Supply for Dell Dell Optiplex 760 960 980 SFF

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
MAX. OUTPUT POWER: 235W

• Manufacturer: Dell
• Model: F235E-00
• Part Number: PS-5231-5DF1-LF
• Dell Part number: R224M, 0R224M, CN-0R224M

Connectors
• 1x 24-Pin Mini ATX System Board Connector
• 1x Serial ATA (SATA) Connector
• 1x 4 Pin ATX +12V Power Connector
• 1x MINI SATA (Internal)

Part Number:
FR610 PW116 RM112 67T67 R224M WU136 R225M G185T H235P-00 H235E-00 F235E-00 L235P-01 AC235AS-00 PS-5231-5DF-LF HP-D2351A0 HP-D2352AO RM112 WU136 PW116 G185T

Model Numbers: F235E-00, L235P-01, H235P-00, H235E-00

Compatible Models
DELL Optiplex 760 Small Form Factor (SFF)
DELL Optiplex 780 Small Form Factor (SFF)
DELL Optiplex 960 Small Form Factor (SFF)
DELL Optiplex 980 Small Form Factor (SFF)
DELL Optiplex 580 Small Form Factor (SFF)

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new dell D180EBS-00 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.