Brand new Dell D850EF-00 850W Power Supply for Dell Alienware Aurora R5 R6 R7

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.

MAX. OUTPUT POWER: 850W
AC INPUT
100-240V ` 10A,
47-63Hz
DC OUTPUT
+12VA = 32A,
+12VB = 48A,
+12VD = 16A,
+3.3V = 20A,
+5V = 20A,
-12V = 0.5A,
+5Vaux = 4A,
Dimensions
150mm x 86mm x 189mm

PN: N1WJD, 0N1WJD, 48Y6D, 048Y6D
Model No. D850EF-00,DPS-850AB-2 A, HU850EF-00, HK950-11PP

Works with the following connectors (not included)
(2) JX68G for R3 & R4 - 6+2 PCI-E Cable 14"
(2) G9Y40 for R5 & R6 - 6+2 PCI-E Cable 10"
(1) MD63V for R7 - 8-pin
(1) GP6MV for R9 - 4-pin 17"
(1) G2GX9 for R10 - Angled Dual SATA 16"
(1) 4NT8R for R12 - HDD (Dual SATA) + ODD (miniSATA) 7.5"
(1) 654MT for ATX connectors 9"

Compatible Models
Dell Alienware Aurora R5
Dell Alienware Aurora R6
Dell Alienware Aurora R7

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new dell D850EF-00 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.