Brand new Dell B275AM-00 275W Power Supply For Dell OptiPlex 790 3010 7010 9010 Tower

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
Dell Optiplex 3010 7010 9010 Precision T1600 T1650 MT Power Supply PSU 275W NFRTK 61J2N D3PMV FDT8H PCB013 AC275AM-00 HU275AM-00
MAX. OUTPUT POWER
275W
AC INPUT:
100-240V~, 50-60Hz, 5.0A
DC OUTPUT:
+2.0V = 13.0A
+3.3V = 10.A
+12.0VA = 17.0A
+12.0VB = 10.0A
-12.0V = 0.5A
+5.0VFP = 4.0A
Dimensions:
150mm x 86mm x 140mm
Connectors
(1) 24-Pin ATX Connector (12")
(1) 12V 4-Pin Connector (6.5")
(4) SATA Connectors ( 6.25" & 9.25" on same cable / 18.25" & 19.5" on same cable)

Compatible Part No:
053N4,56DXG,61J2N, 841Y4,84J9Y,CF5W6,CPFN1,D3PMV,FC1NX,FDT8H,NFRTK,R8JX0,VGDDM

Compatible Model No:
AC275AM-00,AC275EM-00,D275EM-00,H275AM-00,HU275AM-00,L275AM-00,PCB013,PS-6271-6DJ,B275AM-00

Compatible Models (not limited to)
Dell Optiplex 3010, 7010, 9010 MT Mini Tower
Dell Precision T1600, T1650
Dell Vostro 260

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new dell B275AM-00 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.