Brand new Liteon Acer PS-5221-9AB 220W Power Supply

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.

220W For Acer Liteon PS-5221-9 PS-5221-9AB FSP220-50SBV CPB09-D220R Power Supply

Output power:220W
Voltage: 100-127V ~/6A - 220V-240V ~/3A 50Hz-60Hz
Interface: motherboard power supply 20+4PIN (line is shorter 10CM)
CPU power supply 4PIN (line length 26CM),
hard disk power supply 2 SATA (line length 16CM)

Compatible Part #’s: PS-5221-9AB , Delta DPS-220UB A ,DPS-220UB-5 A,DPS-220UB-2 B, Chicony CPB09-D220R,PS-5221-06 ,PS-5221-08,PS-5221-9,L220AS-00,H220AS-00,HU220NS-00,GW-FLX180,GW-FLX220,FSP220-50SBV

Spare part number: PY.22009.002, PY.2200B.001, PY.2200B.002

Compatible Models:
Acer Aspire X1200, X1300, X1301, X1400, X1420, X1420G, X1430, X1430G, X1470, X1700, X1800, X1900, X1920, X1930, X1935, X3-100, X3100, X3200, X3300, X3400, X3400G, X3450, X3470, X3475, X3810, X3812, X3910, X3950, X3960, X3990, X3995, X5300, X5810, XC-105, XC100, XC600, Z3100, Z3101, Z3730, Z3731, Z3751, Z3760, Z3761, Z5101, Z5751, Z5760, Z5761
Acer eMachines EL1321, EL1333, EL1333G, EL1352, EL1352G, EL1358, EL1358G, EL1360, EL1833, EL1850, EL1850G, EL1852, EL1852G, EL1870, L1200, L1210, L1320, L1700,
Acer Veriton X2110, X2610, X2610G, X2611G, X270, X275, X4610G, X4618G, X4620G, X480G, X490G, X498G, X6620G, Z410G, Z411G, Z430G, Z431G

Gateway NV77H, SX2100, SX2110, SX2110G, SX2185, SX2300, SX2310, SX2311, SX2370, SX2380, SX2800, SX2801, SX2802, SX2803, SX2840, SX2841, SX2850, SX2851, SX2855, SX2865, SX2870,
Gateway One ZX4350, ZX4351, ZX4931, ZX4951, ZX6951, ZX6960, ZX6961

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new Acer PS-5221-9AB Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.