Brand new Acer PS-3221-9AB 220W Power Supply

• Product Details
• Power Supply Tips

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.

Acer Veriton B430 B630 X2640 X4630 X4630G X6630 SFF Power Supply PSU 220W FSP220-30FABA PS-3221-9AB
Model : Veriton X4630 X4630G
Max Output Power : 220W
Type : Power Supply

Compatible Part Number:
FSP220-30FABA DC.2201B.001 DC.22018.002 DC.2201B.002 9PA2202500

Model No: PS-3221-9AE PS-3221-9AB

Connector 1x 12+4 Pin Connector

Compatible Part #'s: DC.2201B.001, PS-3221-9AB, DC.22018.002, DC.2201B.002, 9PA2202500, FSP220-30FABA.

Compatible Models: Acer Veriton B430, B630, X2640, X2640G, X4630, X4630G, X4640G, X6630G, X6640G. New Acer 220 watt computer power supply. This power supply only works with the models listed below. This has a 12 pin P1 connector and a 4 pin P2 connector.

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new Acer PS-3221-9AB Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.