Brand New For Acer 500W Switching Power Supply 6Pin+4Pin+8Pin(6+2) FSP500-20TGBAA.All power supplies are tested by our in house technicians and they are guaranteed to function properly.
Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.
FSP500-20TGBAA/B PA-1181-10AC 10AB FSP180-10TGBAA PA-2251-2AB FSP250-20TGPAA PSU For Acer 6Pin 500W Power Supply
Rating Power:401W - 500W
Origin:CN(Origin)
Model Number:FSP500-20TGBAB
Application:Desktop
Input Voltage:100V-240V~ 5A
6-Pin Motherboard + 4-Pin CPU + 8Pin (6+2) Graphics Card
Compatible Models:
Acer Veriton B630
Acer Veriton B850
Acer Veriton D650
Acer Veriton D850
Acer Veriton E450
Acer Veriton ES2720G
Acer Veriton ES2730G
Acer Veriton S2660G
Acer Veriton S4660G
Acer Veriton S6660G
Acer Veriton X2660G
Acer Veriton X4660G
Acer Veriton X6660G
1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.
2. Install the new Acer FSP500-20TGBAA Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)
3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.