Home :: Acbel Power Supply :: AcBel PCB038 Power Supply

For AcBel PCB038 180w Power Supply

PCB038 – 180W Lenovo Thinkcentre E73 H530 AcBel Power Supply, enjoys 6 Months Warranty,30-Day Money Back!

AcBel PCB038 Power Supply

For Acbel Polytech PCB038 Server Power Supply 180W.All power supplies are tested by our in house technicians and they are guaranteed to function properly.


  • Model: PCB038
  • Compatible with Lenovo ThinkCentre E73 Mini Tower
  • Wattage: 180 WATT
  • Condition:
    Brand new, Tested, Working Good

Our Price : AU$
  • Qty:
$ QTY:2-5
$ QTY:6-10
$ QTY:11+

  • Availability: In stock
  • Condition: new, Tested, Working Good
  • Warranty: 6 Months Warranty | 30-Day Money Back
  • Compatible Brand:For AcBel

Product Details

Please make sure that you are ordering the correct power supply. All of the compatible models listed below come in different sizes and each size has a different power supply. Please check the part #'s, pictures and specifications carefully to make sure that you are ordering the correct power supply.

54Y8870 – PCB038 – 180W Lenovo Thinkcentre E73 H530 AcBel Power Supply

Part Number 54Y8870
Model Number PCB038
Max Power 180W
AC Input
100-127V~, 50/60Hz 6.0A
200-240V~, 50/60Hz 3.0A

DC Output
+12.0V = 14.5A
+5.08Vsb = 2.5A
-12.0V = 0.2A

Dimensions: 150mm x 86mm x 100mm
Connectors
(1) 12-Pin Connector (12")
(2) 4-Pin Connector (11")

Application For Lenovo Thinkcentre E73 H530
Condition OEM, Tested, Working

HOW TO REPLACE YOUR PC POWER SUPPLY.

1.Remove the dead pc power supply Once you've disconnected all the leads, look at the rear of the case and find the three or four screws holding the power supply in place. Remove them, then gently lift out the PS, making sure that the cabling doesn't get tangled on, say, a RAM module or expansion card and accidentally pull it loose.

2. Install the new AcBel PCB038 Pc power supply Out with the old, in with the new. Make sure the replacement Pc power supply is set to the correct voltage. Once the old PS is out, put the new one in its place and screw it in. Now just reverse the steps you performed: connect the leads to their respective outlets, replace any extracted components, and consult your photos to make sure you've left no lead unplugged. (You'd be surprised how easy it is to forget, say, the DVD lead, especially when you've spent 10 minutes trying to wedge in that pesky front-panel lead.)

3. Fire it up Before you close up the case, make sure everything works. Connect the power cord to the Pc power supply, plug in your monitor and keyboard, and fire up the machine. Unless you've failed to connect the main leads to the motherboard, it should come right to life, just like before. Let it boot completely, then check to make sure there's power to the optical drive(s) and, if applicable, the front panel.